解决方案搜寻 技术支持

电池管理系统

Battery Icon电池管理系统 (BMS)

The battery pack is the most expensive single component in an EV and contains detailed monitoring and control to maintain a long, safe operating life. The BMS is responsible for monitoring individual cell health, balancing, operating pack heating and cooling systems, reporting state of charge and disconnecting power from the vehicle in a fault or collision.

This monitoring must continue even when the vehicle itself is parked and not in use. So that, for example, the pack heater can be engaged to maintain acceptable temperature in very cold conditions. This makes energy efficiency and minimizing the load on the HV battery critical to minimize range loss or worst case to prevent a dead vehicle.

PI's reinforced isolated flyback and non-isolated buck converter products are idea for generating internal low voltage supply rails. The extremely low no-load consumption and high efficiency reduce background discharge of the HV battery. Overall power loss is lower than relying on the 12 V system and provides the BMS the ability to continue to operate on loss of the 12 V system (discharged 12 V battery).

参考设计

相关产品

Related Products
产品
数据手册
拓扑结构
电压等级
产品描述
Topology Flyback, Secondary Side - FluxLink Regulated
Power Level 100 W
Description

适合汽车应用的集成750 V、900 V及1700 V开关和FluxLink反馈技术的恒压/恒流准谐振反激式开关IC

Topology Non-Isolated Flyback, Buck/Boost/Buck-Boost
Power Level 850 mA
Description

适合汽车应用的集成了系统级保护的高能效开关IC,可实现低元件数的电源设计

补充文件